T200-800 Ethanol recovery tower

Structural characteristics and technical performance
The device adapts high effect ceramics wave filler. The body of disillation tower is made of stainless steel. In this way it can prevent from the phenomenon of filler block caused by scrap iron and its life is prolonged.All parts that will contact ethanol in the device such as condensor.buffer tank,cooling snake pipe are made of stainless steel in order to guaran-tee that the finished product,ethanol,is not polluted. Model W still may use disassembled U type heating pipe.When maintenance,it can be removed out to the still.So it is very convenievt to clean the outer wall of heating pipe and the inner wall of still.
In Model ZW.the indirect heating still is omitted.The condensor adapts calandria heat exchanger. Of course the screw plate heat exchange and coil pipe cooler can also be provided as request. When adapt coil pipe cooler,the buffer tank.

Applications
The device is suitable for recovering dilute ethanol of pharmaceutical industry.foodstuff industry.light industry.chemical industry and so on. It is also suitable for distilling solvents such as methanol and so on. Using this device.about 30° of dilute ethanol can be distlled into 90-95° as request. If the finished product has higher requirement to alcohol content,the ration of reflex should be increased.But the output will be decreased.

Constitutes of device
Model ZT has two specifications, Each specification is equipped with distillation tower, still , condusator, buffer-tank,measurer of specific gravity. Other auxiliary equipment and meters and instruments such as measure tank, storage tank, pmp, rotameter and temperature indicator should be
prepared by customer. Our company can also provide through additional process or order instead of customer as request.